Skip to main content

Charging the Dog Collar Device

NOTICE

To prevent corrosion, thoroughly dry the contacts on the dog collar device and the surrounding area before connecting the charging clip.

You should fully charge the battery before you use the device for the first time. Charging a fully depleted battery takes about three hours.

  1. Snap the device Callout number one onto the charging clip Callout number two.

    Close-up view of the charger with callouts
  2. Plug the power cable into a power source.

    The status LED is solid red when the device is charging.

  3. After the status LED turns solid green, remove the charging clip from the device.
Copyright © Garmin. All rights reserved.GUID-E731F855-DF78-4FA9-AC07-7CF20EB8BE60 v2