Skip to main content

Installing and Setting Up the Dash Cam

NOTICE

Before installing the Dash Cam, you must install the mount and allow the adhesive to bond to the windshield for 24 hours. Failure to allow adequate bonding time may cause the mount to detach from the windshield, which could result in damage to the product or mount.

  1. Plug the vehicle power cable Callout number one into the USB port Callout number two on the device.

    Device and mount assembly with callouts
  2. Press the socket Callout number three onto the mounting arm Callout number four until in snaps into place.
  3. Plug the other end of the vehicle power cable into a power outlet in your vehicle.

    The device turns on.

  4. Follow the on-screen instructions to complete the initial device setup.

    The camera view appears.

  5. Adjust the position of the camera to capture the desired field of view.
Copyright © Garmin. All rights reserved.GUID-F79C150D-E3E2-493F-9338-23C27A020612 v2