Skip to main content

Calibrating Your Foot Pod by GPS

Before you can calibrate your device, you must acquire GPS signals, and pair your device with the foot pod (Pairing Your ANT+ Sensors).

  1. Select the action key.
  2. Select Setup > ANT Sensor > Foot Pod > Calibrate > GPS.
  3. Select Start to begin recording.
  4. Run or walk approximately 0.62 mi. or 1 k.

    The device informs you when you have traveled far enough.

Copyright © Garmin. All rights reserved.GUID-C5A05FA7-3235-43F8-B8CF-0A41A61D3C7C v5