Pairing the Sensors with Your Device

The first time you connect a wireless sensor to your device using ANT‍+^® or Bluetooth^® technology, you must pair the device and sensor. After they are paired, the device connects to the sensor automatically when you start an activity and the sensor is active and within range.

NOTE: The pairing instructions differ for each Garmin^® compatible device. See your owner's manual.

Bring the Garmin compatible device within 3 m (10 ft.) of the sensor.
Stay 10 m (33 ft.) away from other wireless sensors while pairing.
Rotate the crank arm or wheel two revolutions to wake up the sensor.

The LED flashes green for five seconds to indicate activity. The LED flashes red to indicate a low battery level.
If available, pair the sensor using ANT‍+ technology.

NOTE: The sensor can pair with up to two Bluetooth devices and any number of ANT‍+ devices.

After you pair the first time, your Garmin compatible device automatically recognizes the wireless sensor each time it is activated.

Speed Sensor 2 and Cadence Sensor 2

Previous Topic

Next Topic

Download PDF

Print Page

Pairing the Sensors with Your Device