Skip to main content

Selecting a Training Mode

When your device is paired with a smartphone (Syncing the Dog Collar Device with the Garmin Canine App), you can use smart mode. You must select smart mode on the collar to use the settings in the Garmin Canine™ app. When you do not select smart mode during setup, the device defaults to the last standard mode you used.
TIP: The device turns off when you hold the button for more than three seconds.

When the mode is set in the app, the center LED indicator turns blue and the smart mode option becomes available after you cycle through the standard corrections. You must press the button to see the current mode. When a correction is issued in smart mode, the corresponding LED indicates your selected correction.

You can select a standard or smart mode.

  1. Remove the collar band from the device.
  2. Press the mode button until the green LED indicates the current mode.
  3. Press the mode button within two seconds to cycle the green LED through the modes, and select a mode.
    NOTE: When the center LED is blue, you can select smart mode.

    After two seconds, the LED turns from green to red, and the device issues a sample correction of your selected mode.

    If the device is in smart mode, the blue LED cycles to a green, then a red LED on the selected correction mode.

Copyright © Garmin. All rights reserved.GUID-5C65E3E3-EC74-4CE1-97EB-A170747AEC12 v2