Skip to main content

Using the Clip

NOTE: Your clip may look slightly different from the image.

You can use the clip to attach the device to your belt, pocket, or bag.

  1. Slide the bottom of the device into the bottom of the clip.
    NOTE: If you place the device into the clip upside-down, it does not lock into place and could fall out of the clip easily.
  2. Press the top of the device into the top of the clip until it clicks.

    Device and mount
  3. To remove the device, pull up the top of the clip while pressing on the back of the device, and slide the bottom of the device out of the bottom of the clip.
Copyright © Garmin. All rights reserved.GUID-A7855F8F-1986-4C31-93AB-62F848B1D6E9 v6