Pairing the Varia Radar Device with Your Phone

The first time you connect the Varia™ RCT715 device to the Varia app on your phone, you must pair both devices. After the initial pairing, the Varia app automatically connects to the Varia RCT715 when you open the app and the radar device is active and within range.

  1. Bring your phone within range (3 m) of the radar device.
    NOTE: Stay 10 m away from other Bluetooth® sensors while pairing.
  2. On your compatible phone, enable Bluetooth technology.
  3. From the app store on your phone, install and open the Varia app.
  4. Select Pair Now.
  5. While the Varia RCT715 device is turned off, hold the device button for 2 seconds to enter pairing mode.

    The device status LED flashes purple, and the tail light turns on. The device is in pairing mode for 5 minutes or until you press the device button.

  6. Select That's Mine.

When the radar device is paired with your phone, the app displays the current radar status and Battery status symbol.

GUID-FF49DAFA-3213-4C92-924F-2532424071B1 v3
May 2023