M10 (³/₈ in.) bolts, washers, and nuts to secure the actuator to the mounting surface

• You must use marine-grade hardware, such as 316 stainless steel, to secure the mounting base

• You should use hex bolts, flange bolts, or other suitable fastener with a pan head to avoid damaging the mounting base

Tiller arm (if needed)

Safety glasses

Drill and drill bits

Wrenches

Hex bits or wrenches (to secure the actuator to the mounting base)

LOCTITE^® 638™ retaining compound or equivalent (recommended)

For annual maintenance:

• High-quality marine-grade grease compatible with nitrile seals for lubricating pivot points

• AeroShell^® 64 grease for lubricating the leadscrew inside the actuator tube