Performing a Static Torque Test
The static torque test is intended for advanced cyclists and installation experts. This test is not required under normal circumstances to achieve good results with the Rally™ system. This test is available for compatible Edge® devices.
Garmin® recommends performing the static torque test a minimum of three times and averaging the reported torque values.
- Go to support.garmin.com.
- Enter your product name.
- Enter "torque test" to view the FAQ topic.
Following repeated static torque tests, if the reported torque value is consistently different than the expected value, you can enter a scale factor for one or both pedals. The scale factor is stored in the pedal and adjusts the power value that is calculated on the pedal. The scale factor is sent to the Edge device and stored on Edge device.