Skip to main content

Resetting the Rally Pedals

If the device stops responding, you may need to reset it by disconnecting and reconnecting the battery cover. This does not erase any of your data.

  1. Use a 4 mm hex key to remove the battery cover Callout number one and battery.

    Device with a hex key and a glyph
  2. Replace the battery and battery cover, and hand tighten it.
    NOTE: Do not damage or lose the O-ring gasket.
  3. Use a 4 mm hex key to tighten the battery cover to 3.6 lbf-ft. (5 N-m).

    The pedal LED flashes red once.

Copyright © Garmin. All rights reserved.GUID-F384D11E-79B0-4D97-BB69-DD8922C20299 v4