Configuring the DSP Settings
You must download and install the Fusion-Link™ remote control app on your compatible Apple® or Android™ device before you can configure the DSP settings (Fusion-Link Wireless Remote Control App).
You can configure the DSP settings to optimise the sound on each zone with the installed speakers, amplifiers and environment.
- From the settings menu on your Apple or Android device, connect to the stereo using Bluetooth® technology or connect to the same wireless network as the stereo.
- Open the Fusion-Link remote control app on your compatible Apple or Android device.
- If necessary, select the stereo you want to configure.
- Select
> MUSIC SETTINGS. - Select a zone.
- Select DSP SETTINGS.
- Configure the DSP settings as needed, depending on the models of Fusion® speakers and amplifiers connected to the zone.
- Repeat these steps for each zone.
- After you have finished configuring the DSP settings for all zones, select an option:
-
On an Apple device, select
> Zone > SETTINGS > SEND DSP SETTINGS -
On an Android device, select
> Zone > SEND DSP SETTINGS.
-