Skip to main content

Performing a Safety Stop

You should perform a safety stop during every dive to help reduce the risk of decompression sickness.

  1. After a dive of at least 11 m (35 ft.), ascend to 5 m (15 ft.).

    Safety stop information appears on the data screens.


    Screenshot of a safety stop with callouts

    Callout number 1

    The safety stop ceiling depth.

    Callout number 2

    The safety stop timer.

    When you are within 1 m (5 ft.) of the ceiling depth, the timer starts counting down.

  2. Stay within 2 m (8 ft.) of the safety stop ceiling depth until the safety stop timer reaches zero.
    NOTE: If you ascend more than 3 m (8 ft.) above the safety stop ceiling depth, the safety stop timer pauses, and the device alerts you to descend below the ceiling depth. If you descend below 11 m (35 ft.), the safety stop timer resets.
  3. Continue ascending to the surface.
GUID-EECCAC99-90D6-4AB1-9A3A-EC433D3365E2 v2
December 2024
© 2024 Garmin Ltd.