Dive Settings
You can customize the dive settings based on your needs. Not all settings are applicable for all dive modes.
From the watch face, press , select Activities, select a dive activity, press , and select Activity Options.
- Advanced Settings
-
Customizes advanced settings for diving activities (Advanced Dive Settings).
- Apnea Discipline
-
Sets the discipline type for apnea diving.
- Auto Save Timeout
-
Sets the length of time before the watch ends and saves a dive after surfacing.
- Conservatism
-
Sets the level of conservatism for decompression calculations for scuba diving. Higher conservatism provides a shorter bottom time and a longer ascent time.
- Display Settings
-
Sets the screen brightness and timeout for diving activities.
- Gas
-
Sets the gas blend used for scuba diving.
- PO2
-
Sets the partial pressure of oxygen (PO2) thresholds, in bar, for warnings and critical alerts for scuba diving (Dive Alerts). The PO2 Warning value is the threshold for the highest oxygen concentration level that you are comfortable reaching. The PO2 Critical value is the threshold for the maximum oxygen concentration level that you should reach.
- Pool Mode
-
Enables pool mode for scuba diving. When the watch is in pool dive mode, the decompression lockout feature functions normally, but dives are not saved to the dive log.
- Safety Stop
-
Sets the safety stop duration for scuba diving.
- Water Type
-
Set the water type for diving activities.