Skip to main content

Preparing the Motor for Transducer Replacement

Before you can replace the transducer, you must perform these actions to prepare the motor.

  1. Disconnect the motor from the power source.
  2. Open the shaft cap (Opening the Shaft Cap).
  3. Disconnect the cables in the shaft cap (Disconnecting the Cables in the Shaft Cap).
  4. Remove the transducer cable from the shaft cap (Removing the Transducer Cable).
  5. Remove the shaft cap (Removing the Shaft Cap).
  6. Remove the shaft from the steering system (Removing the Shaft from the Steering Servo).
GUID-EDBE2B74-2479-4B1A-AA6B-562A4F77EE8E v3
March 2025
© 2019 Garmin Ltd.