Swipe the screen left to open the menu, and select Settings > Parking Guard > Settings.

Enable

Enables or disables the Parking Guard feature.

Auto Start

Sets the amount of time the vehicle must remain still before the camera turns on the Parking Guard feature.

Impact Sensitivity

Adjusts the sensitivity level for incident detection while the Parking Guard feature is active.

Monitoring Time

Sets the amount of time the Parking Guard feature remains active before it turns off.

Run on Battery

Sets the Parking Guard feature to use the camera battery if an external power source is not connected.

NOTE: If you touch the camera while the Run on Battery setting is enabled, it may turn on unexpectedly when it detects motion.

Record Before Incident

Sets the device to record 15 seconds before incidents are detected. You must connect your camera to an external power source to use this option.