Connecting the Wiring Harness to Power
When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product specifications. In addition, connecting the power cable without the appropriate fuse in place will void the product warranty.
If it is necessary to extend the power and ground wires, you must use 18 AWG (0.82 mm²) wire.
- Route the wiring harness to the power source and to the device.
- Connect the red wire to the positive (+) battery terminal, and connect the black wire to the negative (-) battery terminal.
- Install the locking ring and o-ring on the end of the wiring harness.
- Connect the wiring harness to the device by turning the locking ring clockwise.