Connections Panel Identification
|
Dante® NETWORK |
Two RJ45 ports with status LEDs connected to an internal network switch for Dante standard network connections |
|---|---|
|
12V Trigger |
Dual 12-volt mini jacks to activate the speaker with a trigger signal (In) and turn on other components with an output signal (Out). Both jacks accept standard 3.5 mm (1/8 in.) plugs with 12 volts DC connected to the tip conductor and ground connected to the ring or sleeve conductor. |
|
Expansion port (behind cover) |
44-pin D-sub connection for future expansion |
|
USB-C® (behind cover) |
USB-C connection for diagnostics and configuration using a computer with the Primacy® Desktop application. |
|
DFU button (behind cover) |
Hold for seven seconds to reset the speaker to its original factory default state. NOTE:
This erases all saved speaker settings.
|
|
Reset button (behind cover) |
Press to restart the speaker. |
|
ANALOG INPUTS |
|