Primacy^® Speaker Placement:

The placement of your speakers can greatly impact the in-room response and affect the amount of work the P.A.R.O. system must perform to achieve its targets.

• If you are installing the speaker with the optional floor stand accessory, you should consider the floor type when choosing the speaker's final location and install the appropriate floor spikes suitable for your speaker's floor type, if necessary. Refer to the documentation included with the Primacy floor stands for additional information.

• Each speaker interacts with the room's boundaries independently, so symmetrical positioning of the left and right speakers is preferred.

• Furniture, walls, floors, and ceilings should be at similar distances from the speakers.

• You should apply acoustic treatment as needed to absorb or diffuse reflection points.

Primacy CS Placement:

• You must place the Primacy CS near the listening area to allow placement of the included calibrated microphone at the main listening position. The cable length of the included calibrated microphone is 9 m (30 ft.).

  TIP: If the distance between the Primacy CS and the main listening position exceeds the length of the included calibrated microphone cable, temporarily move the Primacy CS closer to the speakers to perform the P.A.R.O. calibration process.

• You must connect your Primacy speakers to the Dante^® speaker outputs of your Primacy CS.

• See the documentation included with the Primacy CS for additional information.