Skip to main content

Installing the Spy Pole on the Force Trolling Motor Bracket

Before you connect the Spy™ pole to the trolling motor, you must install the bracket on your Force® trolling motor.

  1. Align the three pegs on the bottom of the Spy™ pole housing with the three holes in the bracket.
  2. Press the front, wider peg down into the slot in the bracket.
  3. Press the other two pegs down into the slots in the bracket until you hear a click.
    NOTICE
    Ensure that the quick release pin is fully pressed into the bracket.
    The Spy™ pole is securely connected to the bracket.
GUID-CE86F073-380E-435D-8743-D823C364C077 v1
March 2026
© 2026 Garmin Ltd.