Skip to main content

Installing the Trolling Motor Bracket on a Force Trolling Motor

The Spy™ pole can be mounted onto any compatible Garmin® scissor-style trolling motor, such as the Force® or Force Pro trolling motor.
NOTE: You can attach the bracket so that it is facing either the port or starboard side of your vessel.
  1. Remove the stabilizer mount from your trolling motor if you have one installed on the same side as the Spy™ pole.
  2. Place the three 3/8 in. washers on the included 3/8 in. x30 mm hex screws.

    The Spy Pole Mount attaching to a Force trolling motor
  3. Line up the three screw holes in the bracket with the holes in the bottom of the trolling motor.
  4. Using a 5/16 in. hex wrench or bit, secure the bracket to the trolling motor using the three screws.
GUID-CE86F073-380E-435D-8743-D823C364C077 v1
March 2026
© 2026 Garmin Ltd.