Skip to main content

Setting the Water Temperature Offset

The temperature offset compensates for the temperature reading from a temperature sensor or temperature-capable transducer.

  1. Measure the water temperature using the temperature sensor or temperature-capable transducer that is connected to the network.
  2. Measure the water temperature using a different temperature sensor or a thermometer that is known to be accurate.
  3. Subtract the water temperature measured in step 1 from the water temperature measured in step 2.

    This value is the temperature offset. Enter this value in step 5 as a positive number if the sensor measures the water temperature as being colder than it actually is. Enter this value in step 5 as a negative number if the sensor measures the water temperature as being warmer than it actually is.

  4. Select Settings menu > My Vessel > Temp. Offset.
  5. Enter the temperature offset value calculated in step 3.
GUID-CDD85099-F5B6-41B4-84D1-524AE6475690 v5
March 2024
© 2022 Garmin Ltd.