The maximum temperature recorded in the last 24 hours.

The minimum temperature recorded in the last 24 hours.

The margin of error for your exact location. For example, your GPS location is accurate to within +/- 12 ft. (3.65 m).

The current time of the countdown timer.

The uncalibrated environmental pressure.

The average vertical distance of ascent since the last reset.

The maximum rate of ascent in feet per minute or meters per minute since the last reset.

The total elevation distance ascended since the last reset.

The direction of the next turn in the route. You must be navigating for this data to appear.

The average lap time for the current activity.

The calibrated current pressure.

The remaining battery power.

The direction from your current location to a destination. You must be navigating for this data to appear.

The amount of total calories burned.

The direction you are moving based on the compass.

The direction from your starting location to a destination. Course can be viewed as a planned or set route. You must be navigating for this data to appear.

The stopwatch time for the current lap.

The current day, month, and year.

The average vertical distance of descent since the last reset.

The maximum rate of descent in feet per minute or meters per minute since the last reset.

The total elevation distance descended since the last reset.

The remaining distance to the final destination. You must be navigating for this data to appear.

The remaining distance to the next waypoint on the route. You must be navigating for this data to appear.

The total time recorded. For example, if you start the timer and run for 10 minutes, then stop the timer for 5 minutes, then start the timer and run for 20 minutes, your elapsed time is 35 minutes.

The altitude of your current location above or below sea level.

The altitude of your current location above ground level (if maps contain sufficient elevation information).

The highest elevation reached since the last reset.

The lowest elevation reached since the last reset.

The estimated time of day when you will reach the final destination (adjusted to the local time of the destination). You must be navigating for this data to appear.

The estimated time of day when you will reach the next waypoint on the route (adjusted to the local time of the waypoint). You must be navigating for this data to appear.

The ratio of horizontal distance traveled to the change in vertical distance.

The glide ratio required to descend from your current position to the destination elevation. You must be navigating for this data to appear.

The altitude of your current location using GPS.

The direction you are moving based on GPS.

The strength of the GPS satellite signal.

The calculation of rise (elevation) over run (distance). For example, if for every 10 ft. (3 m) you climb you travel 200 ft. (60 m), the grade is 5%.

The direction you are moving.

The vertical distance of ascent for the current lap.

The vertical distance of descent for the current lap.

The distance traveled for the current lap.

The number of laps completed for the current activity.

The average speed for the current lap.

The vertical distance of ascent for the last completed lap.

The vertical distance of descent for the last completed lap.

The distance traveled for the last completed lap.

The average speed for the last completed lap.

The stopwatch time for the last completed lap.

The current position in latitude and longitude regardless of the selected position format setting.

The current position using the selected position format setting.

The position of your final destination. You must be navigating for this data to appear.

This is a blank data field.

A running tally of distance traveled for all trips. This total does not clear when resetting the trip data.

The distance to the left or right by which you have strayed from the original path of travel. You must be navigating for this data to appear.

An arrow points in the direction of the next waypoint or turn. You must be navigating for this data to appear.

The current rate of travel.

The reported speed limit for the road. Not available in all maps and in all areas. Always rely on posted road signs for actual speed limits.

The highest speed reached since the last reset.

The average speed while moving since the last reset.

The average speed while moving and stopped since the last reset.

The stopwatch time for the current activity.

The time of sunrise based on your GPS position.

The time of sunset based on your GPS position.

The temperature of the air. Your body temperature affects the temperature sensor.

The current time of day based on your current location and time settings (format, time zone, daylight saving time).

The estimated time remaining before you reach the destination. You must be navigating for this data to appear.

The estimated time remaining before you reach the next waypoint in the route. You must be navigating for this data to appear.

The direction in which you must move to get back on the route. You must be navigating for this data to appear.

The stopwatch time for all the completed laps.

A running tally of the distance traveled since the last reset.

A running tally of the total time spent moving and not moving since the last reset.

A running tally of the time spent moving since the last reset.

A running tally of the time spent not moving since the last reset.

The angle of difference (in degrees) between the bearing to your destination and your current course. L means turn left. R means turn right. You must be navigating for this data to appear.

The speed at which you are closing on a destination along a route. You must be navigating for this data to appear.

The elevation distance between your current position and the final destination. You must be navigating for this data to appear.

The elevation distance between your current position and the next waypoint in the route. You must be navigating for this data to appear.

The rate of ascent or descent over time.

The rate of ascent or descent to a predetermined altitude. You must be navigating for this data to appear.

The last point on the route to the destination. You must be navigating for this data to appear.

The next point on the route. You must be navigating for this data to appear.