Mounting Considerations
Failure to mount the device without the appropriate vertical or horizontal clearance could cause degraded performance or could interfere with vehicle operations, causing an accident possibly resulting in property damage, serious personal injury, or death.
Failure to ensure sufficient cable slack could result in poor product performance, property damage, or serious personal injury.
When installing the device in a vehicle, do not place the device where it obstructs the driver’s view of the road or interferes with vehicle operating controls, such as the pedals, steering wheel, or transmission levers. Do not place unsecured on the vehicle dashboard. Do not place the device in front of or above any airbag.
When selecting a location to mount the device, observe these considerations before permanently mounting it.
-
Ensure adequate clearance around the device.
-
You must mount the device in a location where it is not exposed to extreme temperatures, such as the exhaust.
-
Installing the device higher on the back of the vehicle provides a better radar view.
-
The included surface mount bracket can be fastened to the back of the vehicle using self-tapping, panhead screws or adhesive.
-
Ensure the device faces backward and is level and parallel to the road.
-
Ensure the device has 180 degrees of horizontal clearance.
-
Ensure the device has 135 degrees of vertical clearance.
