Pairing the Radar Device with a Compatible Edge Device

This task is for the Edge® 1030, 830, 530, and 130 devices. If your device is not listed, go to

  1. Bring the Edge device within range (3 m) of the sensor.
    NOTE: Stay 10 m away from other ANT‍+® sensors while pairing.
  2. Turn on the Edge device.
  3. From the Sensors menu, select Add Sensor > Search All.
  4. While the Varia™ RTL515/RTL516 device is turned off, hold the device key for 2 seconds to enter pairing mode.

    The status LED flashes purple, and the taillight turns on. The device is in pairing mode for 5 minutes or until you press the device key.

  5. Select your sensor.

When the sensor is paired with your Edge device, the radar and bike light status icons appear solid.

Copyright © Garmin. All rights reserved.GUID-C41F445D-457F-447D-88C8-FE286BF157E9 v3