Garmin BlueNet Network with a GXM Antenna
-
You can connect the power and audio module from the antenna to either a Garmin BlueNet chartplotter or a Garmin BlueNet 20 switch using an using an adapter cable (010-13094-00).
-
You can connect the power and audio module from the antenna to legacy Garmin® Marine Network chartplotter or a GMS™ 10 switch.
|
Item |
Description |
Notes |
|---|---|---|
|
|
Garmin BlueNet network devices |
All Garmin BlueNet network devices must connect to one another or to a Garmin BlueNet 20 switch. |
|
|
Legacy Garmin Marine Network devices |
If you have more than two legacy Garmin Marine Network devices, these devices must connect to one another or to a GMS 10 switch. If you have only two legacy Garmin Marine Network devices, you can connect them both to the Garmin BlueNet 30 gateway without first connecting them to one another. |
|
|
GXM antenna connection |
You can connect the power and audio module from the GXM antenna to either a Garmin BlueNet device or a legacy Garmin Marine Network depending on what is easiest to implement in your network. NOTE:
You must connect a
GXM to either legacy
Garmin Marine Network devices or to
Garmin BlueNet devices. You cannot connect a single antenna directly to both types of devices.
|
|
Item |
Description |
Notes |
|---|---|---|
|
|
Garmin BlueNet 30 gateway |
|
|
|
Garmin BlueNet radar |
|
|
|
GXM antenna |
|
|
|
Legacy Garmin Marine Network chartplotter or other device |
|
|
|
Garmin BlueNet network cable |
|
|
|
Power source |
Although not illustrated in this diagram, all devices must connect to power according to the installation instructions provided with the device. |
|
|
Garmin BlueNet chartplotter |
|
|
|
Power and audio module |
You must connect the power and audio module for the GXM antenna to a power source according to the installation instructions provided with the antenna. |
|
|
GMS 10 switch or legacy Garmin Marine Network chartplotter |
|
|
|
Legacy Garmin Marine Network cable |
|
|
|
Legacy Garmin Marine Network to Garmin BlueNet adapter cable (010-13094-00) |
