Garmin BlueNet Network with an IP Camera and no Legacy Garmin Marine Network Chartplotters
If your Garmin BlueNet™ network includes a compatible IP camera, but does not contain any legacy Garmin® Marine Network chartplotters, you must connect the camera to a Garmin BlueNet chartplotter or Garmin BlueNet 20 switch for proper functionality (no PoE isolator needed).
Some jurisdictions may prohibit or regulate recording audio and video, or taking photographs. Jurisdictions may require that all parties have knowledge of the recording and provide consent before you record audio and video or take photographs. It is your responsibility to know and comply with all laws, regulations, and any other restrictions in your jurisdiction.
|
Item |
Description |
Notes |
|---|---|---|
|
|
Garmin BlueNet network devices |
All Garmin BlueNet network devices must connect to one another or to a Garmin BlueNet 20 switch. |
|
|
Legacy Garmin Marine Network device or devices (not chartplotters) |
If you have more than two legacy Garmin Marine Network devices (that are not chartplotters in this instance), these devices must connect to a GMS™ 10 switch. If you have only two legacy Garmin Marine Network devices (that are not chartplotters in this instance), you can connect them both to the Garmin BlueNet 30 gateway without first connecting them to a GMS 10 switch. |
|
Item |
Description |
Notes |
|---|---|---|
|
|
Garmin BlueNet 30 gateway |
|
|
|
Garmin BlueNet radar |
|
|
|
Legacy Garmin Marine Network device (not a chartplotter) |
|
|
|
Third-party IP camera |
If you have no legacy Garmin Marine Network chartplotters connected to the Garmin BlueNet network through a Garmin BlueNet 30, you must connect any compatible IP camera to a Garmin BlueNet device for proper functionality. |
|
|
Power source |
Although not illustrated in this diagram, all devices must connect to power according to the installation instructions provided with the device. |
|
|
Garmin BlueNet network cable |
|
|
|
Garmin BlueNet chartplotter |
|
|
|
RJ45 to Garmin BlueNet adapter cable (010-12531-02) |
When connecting a compatible IP camera to a Garmin BlueNet device, a PoE power isolator is not necessary. You must not use this cable to connect other legacy Garmin Marine Network devices directly to a Garmin BlueNet device. Other than Fusion PartyBus™ stereos and compatible IP cameras, you must connect other compatible legacy Garmin Marine Network devices to a Garmin BlueNet network using a Garmin BlueNet 30 gateway. |
|
|
Legacy Garmin Marine Network cable |
