Replacing the Adhesive on the Mount

You can replace the adhesive disc on the mount to install the device in a new location. Your device includes one extra adhesive disc. Go to https://buy.garmin.com to purchase additional adhesive discs.

  1. If necessary, remove the adhesive from the mount.
  2. Clean the mount.

    The mount must be free of dust, wax, oils, or coatings.

  3. Remove one side of the protective film from the new adhesive disc.
  4. Position the adhesive disc over the mount.
    TIP: The adhesive is extremely sticky. Do not touch the adhesive disc to the mount until it is properly aligned.
  5. Press the adhesive firmly onto the mount, and maintain pressure for 30 seconds.
  6. Install the camera mount onto your windshield (Installing the Camera on Your Windshield).
Copyright © Garmin. All rights reserved.GUID-C06CAB37-73B1-4AE2-88A4-3B9EEA73CC17 v2