Inserting the Gunnel Mount into the Base Align the notches on the bottom of the vertical tube with the hole in the base. The vertical tube will only slide into the base in this orientation. Press the tube down into the base until the two clips lock into place. To remove the gunnel mount from the base, press in on the two pins at the bottom of the vertical tube and pull the assembly out of the base. HomeInserting the Gunnel Mount into the Base
Inserting the Gunnel Mount into the Base Align the notches on the bottom of the vertical tube with the hole in the base. The vertical tube will only slide into the base in this orientation. Press the tube down into the base until the two clips lock into place. To remove the gunnel mount from the base, press in on the two pins at the bottom of the vertical tube and pull the assembly out of the base. HomeInserting the Gunnel Mount into the Base