Heading Screen

The heading screen displays the status of the autopilot.


Heading screen with callouts

Callout number one

Autopilot status information and icon.

Standby and Autopilot status indicator appear in gray when the autopilot is in standby mode.

Heading Hold and Autopilot status indicator appear in green when the autopilot is engaged.

Callout number two

Numeric heading information.

Shows the actual heading when the autopilot is in standby mode.

Shows the intended heading when the autopilot is engaged.

Callout number three

Actual heading (when the autopilot is engaged).

The magenta line shows the actual heading on the compass rose.

Callout number four

Intended heading (when the autopilot is engaged).

The yellow line is shown when using the helm control to adjust the heading. The autopilot steers the vessel until the actual heading aligns with the intended heading.

Callout number five

Rudder position indicator.
NOTE: This functionality is available only when a rudder sensor is connected
Copyright © Garmin. All rights reserved.GUID-BD39FCBD-2F6F-4A48-8A61-1FE1F349792B v2