Network Settings
NOTE:
If a
Garmin® chartplotter is detected on the network, the stereo automatically switches to
GARMIN MARINE NETWORK mode, and all other network settings are disabled.
Select
> SETTINGS, select the name of the remote control, then select
NETWORK.
- DHCP CLIENT
-
Sets the device as a DHCP client. This is the default setting for all devices that are not configured to be a DHCP server.
- STATIC IP
-
Allows you to set a static IP address for the device (Setting a Static IP Address).
- RESET
-
Resets the network configuration on the remote control to factory defaults.
- DETAILS
-
Shows information about the network configuration.
- SAVE
-
Allows you to save changes to the network settings.