Mounting and Powering the Garmin Drive Device in Your Vehicle

WARNING

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight.

Before you use your device on battery power, you should charge it.

  1. Press the suction cup to the windshield, and flip the lever Callout number one back toward the windshield.

    Device mount with callouts
  2. Press the mount Callout number two onto the suction cup ball Callout number three until it snaps into place.
  3. Plug the vehicle power cable into the USB port Callout number four on the device.

    Device connected to power with callouts
  4. Plug the other end of the vehicle power cable Callout number five into a power outlet in your vehicle.
  5. Fit the tab on the top of the mount into the slot on the back of the device, and press the bottom of the mount into the device until it clicks.

    Device connecting to the mount
Copyright © Garmin. All rights reserved.GUID-B9B0B1F8-C5B4-463F-AAA8-F394D1492A06 v1