Blink Codes
After the sonar module is installed, it turns on when the chartplotter is turned on. The color status LED on the sonar module indicates its operational status.
|
LED Color |
State |
Status |
|---|---|---|
|
Green |
Blinking |
The sonar module is connected to a chartplotter and is operating properly. You should see sonar data on the chartplotter. |
|
Red |
Blinking |
The sonar module is turned on, but is not connected to a chartplotter, or is waiting to connect to a chartplotter. If the sonar module is connected to the chartplotter and this code persists, check the wiring connections. |
|
Orange |
Blinking |
A software update is in progress. |
|
Red/Green |
Blinking |
Reserved |
|
Red |
Two blinks followed by a 3-second pause |
Other sonar failure. |
|
Red |
Three blinks followed by a 3-second pause |
The transducer is not detected by the sonar module. If this code persists, check the wiring connections. |
|
Red |
Five blinks followed by a 3-second pause |
The sonar module input voltage exceeds the maximum input voltage. |