Removing the Device from the Cradle
-
Perform an action:
-
On a 7 sv or 9 sv device, press the button on the release lever on the cradle, and pull the lever up.
-
On a 6 sv device, press the release lever on the cradle until you can tilt the device forward.
-
- Tilt the device forward, and lift the device out of the cradle.
-
Install the weather cap on the cradle connector.
NOTICE
Failure to install the weather cap on the cradle connector may result in corrosion that interferes with the connection between the cradle and the device.
Parent Topic: Installing the Device in the Cradle