Maintenance Needs and Schedule

NOTICE

After using the motor in salt water or brackish water, you must rinse off the entire motor with fresh water, and apply a water-based silicone spray using a soft cloth. You should avoid spraying jets of water at the cap on the top of the shaft when rinsing the motor.

To maintain your warranty, you must perform a series of routine maintenance tasks as you prepare your motor for the season. If you use or transport the motor in salt water or dry, dusty environments (traveling on gravel roads, for example) you should perform these tasks more often during the season.

For detailed procedures and information on service and replacement parts, go to garmin.com/manuals/force_kraken_trolling_motor to download the Force® Kraken Trolling Motor Maintenance Manual.


device overview with callouts
  • Examine the coil cable Callout number 1 for wear, and replace it as necessary.

  • Check and clean the power cables Callout number 2.

  • Lubricate the hinge Callout number 3 with marine grade grease.

  • Clean and lubricate the stow and deploy latch pedal Callout number 4 and latch bar.

  • Clean or replace the anodes Callout number 5 in the propeller drive motor.

  • Remove entangled fishing line and other obstructions from the propeller.

GUID-B3BCDA2E-E3B8-4864-840E-DA1DB2C5C670 v4
August 2024