Adjusting Additional Audio Settings for a Zone
-
Select
> SETTINGS.
- Select ZONE.
- Select a zone.
-
Select one or more options:
-
To limit the maximum volume output of this zone, select VOLUME LIMIT, and adjust the level.
-
To adjust the right and left speaker balance of this zone, select BALANCE, and adjust the balance.
-
To reduce the power output to the external amplifier associated with this zone, select EXT. AMP GAIN, and adjust the gain level.
-
To reduce the power output to the internal amplifier associated with this zone, select INT. AMP GAIN, and adjust the gain level.
NOTE: This setting is available only for zones associated with an internal amplifier, typically zones 1 and 2. -
To change the output of this zone from stereo to mono, select MONO.
NOTE: The mono setting is useful if a listening position is closer to one speaker than the other and predominantly hear only that channel. The mono setting combines both channels in each speaker in the zone.
-