Skip to main content

Calibrating the Trolling Motor Compass

Before calibrating the trolling motor compass, you must move to an open area of calm water, with enough space to maneuver the boat in a circle.

NOTICE

Calibrating the trolling motor compass in rough water and wind conditions may negatively affect autopilot performance.

  1. Make sure the trolling motor is in the deployed position (Deploying the Motor from the Stowed Position).
  2. On the remote control, select > Settings > Trolling Motor > Calibrate > Compass.
  3. When prompted, follow the on-screen instructions to calibrate the compass.

    You can use a foot pedal, remote control, or outboard motor to steer the boat while calibrating the compass..

If the autopilot features do not perform as expected, you should repeat the calibration process.

GUID-A7668193-255A-4F7A-AAEC-C153FB825CB4 v2
November 2025
© 2025 Garmin Ltd.