LED Light Groups
A group consists of two or more connected LED lights associated with one another so they regularly behave the same way. For example, you may have LEDs on a set of speakers connected to one port on a lighting controller, and you may have LEDs on a subwoofer in the same area connected to another port on the lighting controller. By adding both of these sets of lights to a group, they will appear as one toggle on the lighting page and turn on and off together.
A group is different from a scene because a connected LED light can only belong to one group at a time. Also, a group appears on the Lights tab in the lighting page along with other connected lights.
NOTE:
LED light groups you create are synchronized between chartplotters connected using a wired or wireless
NETWORK connection only. LED light-group information is not synchronized across the
NMEA 2000® network. If you have multiple chartplotters connected through the
NMEA 2000 network only, you must create and make changes to LED light groups on all chartplotters individually. To create and change the groups on compatible
Fusion® stereos, you must use the
ActiveCaptain® app. See the stereo Owner's Manual for more information.