You can customize the settings for paired transceivers prior to a dive.

Hold MENU, select Konfiguracja nurkowania > Sieć nurkowa i integracja powietrza > Transmitery, and select a transceiver.

Stan

Enables a connection to the transceiver, and shows the current connection status. Connected transceivers show data during a dive and can send or receive messages.

Pozycja

Sets the transceiver location as either your own tank or that of another diver.

Publiczna nazwa butli

Associates a name with your transceiver, which will be visible to your dive network the next time you connect to your transceiver.

UWAGA: If you customize this name, another option appears in the list to clear the name.

Stan SubWave

Displays what SubWave™ features are currently available based on the devices present, along with the current software version, hardware version, or configuration settings. For help troubleshooting issues with the status of your SubWave features, go to garmin.com/SubWaveSupport.

Nazwa

Associates a nickname with another diver's transceiver, which will be visible on your dive data screens. This setting does not change the name that appears for other divers.

UWAGA: If you customize this name, another option appears in the list to clear the name.

Zidentyfikuj

Plays a tone on the selected paired transceiver. This helps you to identify the transceiver without needing to look at the transceiver ID printed on the transceiver housing.

Ciśnienie robocze

Sets how much pressure the tank has when full. This value is used to determine the upper end of the pressure gauge, and to calculate respiratory minute volume (RMV) for tanks using psi units.

Ciśnienie rezerwowe

Sets the threshold values for reserve pressure and critical pressure alerts. The critical pressure threshold value is the greater of half of the reserve pressure or 21 bar (300 PSI).

Objętość

Sets the air volume of the tank. You can use the Zresetuj objętość option if you move the transceiver to a different size tank.

UWAGA: This value is required to calculate volumetric surface air consumption (SAC) and respiratory minute volume (RMV) (Wybieranie metryki wskaźnika zużycia gazu).

SAC/RMV/ATR

Enables calculations for volumetric surface air consumption (SAC), respiratory minute volume (RMV), and air time remaining (ATR) estimates for your transceiver.

Ustaw moc transmisji

Adjusts the power setting if your transceiver is losing connection with the paired dive computer underwater.

O systemie

Displays the transceiver ID, software version, and battery status.

Usuń

Removes a paired transceiver.

Akt. oprogram.

If an update is available, updates the transceiver software using your dive computer (Aktualizowanie oprogramowania odbiornika i przekaźnika za pomocą komputera nurkowego).