Skip to main content

Enabling Group Synchronization

You must remove the stereo from an existing group before you can enable the Save Group setting. You cannot update settings when a stereo is part of a group.

You must enable this setting on each stereo that you want to retain group settings after a power cycle.

  1. From the Media screen, select Options > Installation.
  2. Select the name of the stereo.
  3. Select Power Options > Save Group.

    The stereo retains group settings after a power cycle.

  4. Repeat for additional stereos as needed.
NOTE: You must enable Save Group on all networked stereos for synchronization to work properly.
GUID-8D60E520-A4CC-4669-8D45-79C61C3778A4 v1
October 2025
© 2025 Garmin Ltd.