Showing Polar Data in Data Fields
Before you can view polar data, you must select or import a polar table.
- Open the screen to which you want to add polar data.
-
Perform an action.
-
If there is no polar data in a data field and you'd like to add it, select , then select the data field where you want to add the data.
-
If polar data is present in a data field and you want to change it, press and hold the data field you want to change, then select Replace Data.
-
- Select Sailing.
-
Select the polar data to display in the data field.
-
To show the boat speed from the polar table at the current true wind speed and angle, select Polar Speed.
-
To show the optimal boat speed at the target wind angle, select Target Speed.
-
To show the optimal wind angle at the current true wind speed, select Target True Wind Angle.
-
To show Target TWA converted to apparent using target speed, select Target App. Wind Angle.
-
To show the difference between the current boat speed and the optimal boat speed shown as speed, select Δ Polar Speed.
-
To show the difference between the current boat speed and the optimal boat speed as a percentage, select Δ Polar Speed Percent.
-
To show the difference between the current boat speed and the target boat speed shown as speed, select Δ Target Speed.
-
To show the difference between the current boat speed and the target boat speed shown as a percentage, select Δ Target Speed Percent.
-
To show the difference between the true wind angle and target true wind angle, select Δ Target True Wind Angle.
-
To show the difference between the apparent wind angle and target apparent wind angle and the true wind angle, select Δ Target App. Wind Angle.
-