Bypassing the System From a Chartplotter
One method to bypass the Garmin OnBoard™ engine cutoff system is by using a connected chartplotter.
NOTE:
Bypassing the engine cutoff system using the chartplotter is possible only when
the system has cut off the engines due to a man overboard event with a
Captain tag, or
when testing the system. This option is not available during normal
operation.
Within 30 seconds after the
system has cut off the engines, select one of these options on a connected
chartplotter:
-
Select Yes in the message that reads Do you want to be able to restart the engine now?1
-
Select
> Communications > NMEA 2000 Setup > Device List, select the GOS 10 Hub, then select .
The Garmin OnBoard engine cutoff system is now disabled, and the engines should be restored to previous functionality.
The system remains disabled until you
enable it again or until you turn off the system and turn it back on again.
You must enable the system as soon as possible to be compliant with the AYBC
A-33 standard.
To restore the Garmin OnBoard
engine cutoff system functionality, select > Communications > NMEA 2000 Setup > Device List, select the GOS 10 Hub, then .
1 This option is available only during an man-overboard event
initiated by an MOB tag with the captain role. This message does not
appear when testing the system.