Mounting and Powering the Device in Your Vehicle

WARNING

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight.

WARNING

Both the device and its mount contain magnets. Under certain circumstances, magnets may cause interference with some internal medical devices and electronic devices, including pacemakers, insulin pumps or hard drives in laptop computers. Keep the device away from medical devices and electronic devices.

Before you use your device on battery power, you should charge it.

  1. Open the lever Call-out number one, press the suction cup to the windscreen and flip the lever back towards the windscreen.

    The lever must be oriented towards the top of the windshield.


    Device mounting to the windscreen with callouts
  2. Plug the vehicle power cable Call-out number two into the port on the mount.
  3. If necessary, loosen the thumbscrew on the suction cup arm Call-out number three and the nut on the ball mount Call-out number four, and adjust the mount for better viewing and operation.

    Mount adjustment points with callouts
  4. Tighten the thumbscrew on the suction cup arm and the nut on the ball mount.
  5. Place the device onto the magnetic mount.

    Device connecting to the mount
  6. Plug the other end of the vehicle power cable into a power outlet in your vehicle.
GUID-8C456C2C-AB23-481B-83A8-648090650209 v1
August 2024