Specifications

General
Design	Floorstanding, 3-way active loudspeaker with DSP and discrete internal woofer, mid-range, and tweeter amplifiers
Construction	Primary enclosure: cast aluminum alloy with secondary machining Front baffle: extruded and machined aluminum
Enclosure type	Tweeter: sealed assembly Midrange: sealed, secondary cast aluminum alloy enclosure Woofer: bass-reflex design vented at the base of the primary cast aluminum alloy enclosure
Drivers	Tweeter: carbon fiber dome, 26 mm (1 in.) Midrange: mineral-filled polypropylene cone, 140 mm (5.50 in.) Woofers x 4: aluminum cone, 140 mm (5.50 in.)
Shipping weight	157 kg (345 lb.)
Net weight	123 kg (272 lb.)

Amplifiers
Total continuous rated amplifier power, with less than 0.05% THD+N ¹	1,000 W RMS
Tweeter amplifier	200 W RMS at 6 ohms
Midrange amplifier	200 W RMS at 6 ohms
Woofer amplifier	600 W RMS at 2 ohms

Digital Signal Processing and Conversion
Analog to digital converters	ESS™ SABRE^® ES9822PRO (operating in mono mode)
Digital signal processor	AKM^® triple-core processing at 32 bit/192 kHz for local system volume, crossovers, delays, equalization, and dynamics for each amplifier and driver section
Processing bit depth/resolution	32 bit / 192 kHz
Crossover frequencies/slope	240 Hz / 3 kHz, 24 dB/octave Linkwitz-Riley
Digital to analog converters	ESS SABRE Reference DAC x 3 (operating in mono mode)

Primacy^® Automatic Room Optimization (P.A.R.O.)
Measurement engine	Dual FFT measuring time, frequency, and amplitude
Measured results	Frequency response (RTA, magnitude), impulse response (Lin IR, Log IR, ETC IR), and phase
Computer requirements	Computer running the Primacy Desktop application: Windows^® 10 (OS Build 1809 or later), 11 Mac^® OS 14, 15, 26

Rear Panel Controls and Indicators
Power mode	Off, Auto, or On
Auto power mode	Eco or Faster
Lighting	Off, Dim, or On Top panel accent light with user-adjustable brightness levels. Displays active profile or user-defined color when connected to the Primacy CS.
Rear panel overridden	LED indicates when the rear panel settings are disabled and under control by a connected Primacy CS.
Status	Multicolor LED indicates the speaker's status and operating condition.
Analog input grounding	Grounded or isolated
Analog input sensitivity	Rotary dial with the specific input signal voltages: 1: 8.0V (+18 dBV) 2: 4.0V (+12 dBV) 3: 2.0V (+6 dBV) 4: 1.0V (0 dBV) 5: 0.63V (-4 dBV) 6: 0.45V (-7 dBV) 7: 0.32V (-10 dBV)
High-pass filter	80 Hz @ 24 dB/octave (Off/On)
Bass lift filter	+3 dB shelving filter @ 116 Hz, Q=0.4 (Off/On)
Treble cut filter	-2 dB shelving filter @ 2000 Hz, Q=0.4 (Off/On)
Output level trim	Mute to 0 dB (-1 dB steps)
Expansion port USB-C^® DFU Reset	Service controls ( Connections Panel Identification)

Network Digital Audio Transport
Protocol	Dante^® audio over IP
Standard	IEEE802.3 compliant (1000BASE-T)
Connections	RJ45 x 2 (supports daisy chain speaker connections)
Bit depth/resolution	1CH @ 32 bit / 192 kHz

Balanced Analog Input (XLR)
Input impedance	50 kohms
Pin configuration	Pin 1: shield Pin 2: positive Pin 3: negative
Input Pin 1 ground lift	Via Grounded/Isolated switch
Analog input sensitivity at position 4 with level trim at 0	0.125 V

Unbalanced Analog Input (RCA)
Input impedance	50 kohms
Input ring ground lift	Via Grounded/Isolated switch
Analog input sensitivity at position 4 with level trim at 0	0.125 V

Acoustical
Maximum peak short term sine wave acoustic output, averaged from 100 Hz to 3 kHz @ 1m, half space	>114 dB SPL
Factory target calibration	Calibrated to achieve ±1.5 dB to reference response
Anechoic frequency response	45 Hz to 20kHz, +/- 2 dB, -3 dB @ 35 Hz, -6 dB @ 32 Hz
Latency (at the speaker's analog input)	4.46 ms

Electrical
Mains voltage	100 to 240V AC, 50/60 Hz
Power supply design	Worldwide voltage compatibility with power factor correction and synchronized regulated switching power supply.
Fuse type/value	120V version: 10 A, 250V, 3AB fast acting, 0.25 in. ceramic cartridge 240V version: 6.3 A, 250V, 3AB fast acting, 5 x 20 mm glass cartridge
Power cord	Detachable IEC style 120V: 18 AWG, 10 A 240V: 17 AWG, 10 A
Standby power consumption	Auto power switch with Eco mode: <0.5 W Auto power switch with Faster: <7.0 W
Idle power consumption (active with no signal)	120V: approx. 40 W 240V: approx. 40 W
Active power consumption (on with signal, 80 dB SPL @ 1m, C-weighted)	120V: approx. 42 W 240V: approx. 41 W
12V Trigger	12V DC input, 3.5 mm (¹/₈ in.) jack, tip positive 12V DC output, 3.5 mm (¹/₈ in.) jack, tip positive, 50 mA max. load

¹ This rating was not tested under the FTC standard.

GUID-8B0CC3C5-E3E0-46D4-8390-CDE0BD6B3107 v1

May 2026

© 2026 Garmin Ltd.

JavaScript must be enabled in order to use this site.Please enable JavaScript in your browser and refresh the page.

Specifications

General
Design	Floorstanding, 3-way active loudspeaker with DSP and discrete internal woofer, mid-range, and tweeter amplifiers
Construction	Primary enclosure: cast aluminum alloy with secondary machining Front baffle: extruded and machined aluminum
Enclosure type	Tweeter: sealed assembly Midrange: sealed, secondary cast aluminum alloy enclosure Woofer: bass-reflex design vented at the base of the primary cast aluminum alloy enclosure
Drivers	Tweeter: carbon fiber dome, 26 mm (1 in.) Midrange: mineral-filled polypropylene cone, 140 mm (5.50 in.) Woofers x 4: aluminum cone, 140 mm (5.50 in.)
Shipping weight	157 kg (345 lb.)
Net weight	123 kg (272 lb.)

Amplifiers
Total continuous rated amplifier power, with less than 0.05% THD+N ¹	1,000 W RMS
Tweeter amplifier	200 W RMS at 6 ohms
Midrange amplifier	200 W RMS at 6 ohms
Woofer amplifier	600 W RMS at 2 ohms

Digital Signal Processing and Conversion
Analog to digital converters	ESS™ SABRE^® ES9822PRO (operating in mono mode)
Digital signal processor	AKM^® triple-core processing at 32 bit/192 kHz for local system volume, crossovers, delays, equalization, and dynamics for each amplifier and driver section
Processing bit depth/resolution	32 bit / 192 kHz
Crossover frequencies/slope	240 Hz / 3 kHz, 24 dB/octave Linkwitz-Riley
Digital to analog converters	ESS SABRE Reference DAC x 3 (operating in mono mode)

Primacy^® Automatic Room Optimization (P.A.R.O.)
Measurement engine	Dual FFT measuring time, frequency, and amplitude
Measured results	Frequency response (RTA, magnitude), impulse response (Lin IR, Log IR, ETC IR), and phase
Computer requirements	Computer running the Primacy Desktop application: Windows^® 10 (OS Build 1809 or later), 11 Mac^® OS 14, 15, 26

Rear Panel Controls and Indicators
Power mode	Off, Auto, or On
Auto power mode	Eco or Faster
Lighting	Off, Dim, or On Top panel accent light with user-adjustable brightness levels. Displays active profile or user-defined color when connected to the Primacy CS.
Rear panel overridden	LED indicates when the rear panel settings are disabled and under control by a connected Primacy CS.
Status	Multicolor LED indicates the speaker's status and operating condition.
Analog input grounding	Grounded or isolated
Analog input sensitivity	Rotary dial with the specific input signal voltages: 1: 8.0V (+18 dBV) 2: 4.0V (+12 dBV) 3: 2.0V (+6 dBV) 4: 1.0V (0 dBV) 5: 0.63V (-4 dBV) 6: 0.45V (-7 dBV) 7: 0.32V (-10 dBV)
High-pass filter	80 Hz @ 24 dB/octave (Off/On)
Bass lift filter	+3 dB shelving filter @ 116 Hz, Q=0.4 (Off/On)
Treble cut filter	-2 dB shelving filter @ 2000 Hz, Q=0.4 (Off/On)
Output level trim	Mute to 0 dB (-1 dB steps)
Expansion port USB-C^® DFU Reset	Service controls ( Connections Panel Identification)

Network Digital Audio Transport
Protocol	Dante^® audio over IP
Standard	IEEE802.3 compliant (1000BASE-T)
Connections	RJ45 x 2 (supports daisy chain speaker connections)
Bit depth/resolution	1CH @ 32 bit / 192 kHz

Balanced Analog Input (XLR)
Input impedance	50 kohms
Pin configuration	Pin 1: shield Pin 2: positive Pin 3: negative
Input Pin 1 ground lift	Via Grounded/Isolated switch
Analog input sensitivity at position 4 with level trim at 0	0.125 V

Unbalanced Analog Input (RCA)
Input impedance	50 kohms
Input ring ground lift	Via Grounded/Isolated switch
Analog input sensitivity at position 4 with level trim at 0	0.125 V

Acoustical
Maximum peak short term sine wave acoustic output, averaged from 100 Hz to 3 kHz @ 1m, half space	>114 dB SPL
Factory target calibration	Calibrated to achieve ±1.5 dB to reference response
Anechoic frequency response	45 Hz to 20kHz, +/- 2 dB, -3 dB @ 35 Hz, -6 dB @ 32 Hz
Latency (at the speaker's analog input)	4.46 ms

Electrical
Mains voltage	100 to 240V AC, 50/60 Hz
Power supply design	Worldwide voltage compatibility with power factor correction and synchronized regulated switching power supply.
Fuse type/value	120V version: 10 A, 250V, 3AB fast acting, 0.25 in. ceramic cartridge 240V version: 6.3 A, 250V, 3AB fast acting, 5 x 20 mm glass cartridge
Power cord	Detachable IEC style 120V: 18 AWG, 10 A 240V: 17 AWG, 10 A
Standby power consumption	Auto power switch with Eco mode: <0.5 W Auto power switch with Faster: <7.0 W
Idle power consumption (active with no signal)	120V: approx. 40 W 240V: approx. 40 W
Active power consumption (on with signal, 80 dB SPL @ 1m, C-weighted)	120V: approx. 42 W 240V: approx. 41 W
12V Trigger	12V DC input, 3.5 mm (¹/₈ in.) jack, tip positive 12V DC output, 3.5 mm (¹/₈ in.) jack, tip positive, 50 mA max. load

¹ This rating was not tested under the FTC standard.