Skip to main content

Installing Your Pedals


B symbol

Pedals are not included with the Tacx® NEO Bike Plus trainer. For installation instructions specific to your pedals, see the manufacturer's instructions.

  1. Install the right pedal first.
  2. Apply a thin layer of grease on the pedal spindle threads.
  3. Insert the spindle into the crank arm.

    There are five crank length (mm) options (Crank Length Options). Use the same crank length for both pedals.


    Right crank and pedal with callouts
  4. Tighten the spindle according to the instructions provided with your pedal.
  5. Repeat steps 2 through 4 to install the left pedal.
    NOTE: The left pedal spindle has a left-handed (reverse) thread.

    Left crank and pedal with callouts
Copyright © Garmin. All rights reserved.GUID-8AA4B804-1987-45AC-8B9D-71AE54BD62B0 v1