Removing the Antenna
The antenna is mounted to the bottom cover with three screws under the antenna gear.
- Disconnect the antenna position sensor board cable from the antenna position sensor board on the underside of the antenna gear.
- Rotate the antenna to expose the head of one of the mounting screws through the hole in the antenna gear.
- Using a #1 Phillips screwdriver, remove the first mounting screw.
- Rotate the antenna to expose and remove the other two antenna rotary joint mounting screws.
- Gently lift the belt off the antenna gear, and slowly rotate the antenna to release the belt from the gear.
- Lift the antenna up, and remove it from the bottom case.