In-line Fuse Cable
Garmin® strongly recommends getting an experienced installer with a proper knowledge of electrical systems to install the in-line fuse cable. Incorrectly wiring the power cable or the in-line fuse cable can result in damage to the vehicle or the battery and can cause bodily injury.
In many cases, you must install the included in-line fuse cable on the device power cable to protect the zūmo® navigator from excessive electrical current.
-
You must install the included in-line fuse cable if you are connecting the power cable directly to the vehicle battery.
-
If you are connecting the power cable to an accessory power source or bus bar that already has a suitable fuse or a protective circuit, installing the included in-line fuse is not necessary.
-
When installing the fuse cable, you must connect it to the red system power cable using solder and heat-shrink tubing.