Skip to main content

Pairing the Camera with a Garmin Navigation Device

You can pair the camera with a compatible Garmin® navigation device. For more information about compatible Garmin devices, go to the product page at garmin.com/bc40.

  1. Update your navigation device to the latest software.

    Your device may not support the BC 40 camera without the latest software. For more information about updating the software, see the owner's manual for your navigation device.

  2. Install batteries in the camera.

    The camera enters pairing mode automatically and the LED flashes blue while the camera is in pairing mode. The camera remains in pairing mode for two minutes. If pairing mode expires, you can remove and reinstall the batteries.

  3. Bring the compatible Garmin navigation device outside your vehicle and within 1.5 m (5 ft.) of the camera and turn on the navigation device.

    The device detects your camera automatically and prompts you to pair with it.

  4. Select Yes.
    TIP: If the navigation device does not detect the camera automatically, you can select Settings > Wireless Cameras > Add New Camera to pair with it manually.

    The device pairs with your camera.

  5. Enter a name for the camera (optional).

    You should use a descriptive name that clearly identifies the location of the camera.

  6. Select Done.
GUID-7E13E879-D2C7-4B0C-9E63-CD693B2E7042 v4
October 2024
© 2023 Garmin Ltd.