Skip to main content

Installing the Handlebar Base to the Clutch-Clamp or Brake-Clamp Brackets

  1. Remove the two factory bolts on your clutch-clamp or brake-clamp bracket Call-out number one.

    Image of the handlebar base connecting to the clutch clamp
    NOTE: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on your clutch-clamp or brake-clamp bracket.
  2. Thread the new bolts Call-out number two through the handlebar base, spacers Call-out number three, and clutch-clamp or brake-clamp bracket.
  3. Tighten the bolts to secure the handlebar base.
GUID-7E13E879-D2C7-4B0C-9E63-CD693B2E7042 v4
October 2024
© 2023 Garmin Ltd.