Skip to main content

Mounting Your Device in a Vehicle

WARNING

See the Important safety and product information guide in the product box for product warnings and other important information.

WARNING

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight.

WARNING

Do not use the suction cup mount on a motorcycle.

NOTICE

Before mounting the device, check the local laws pertaining to windscreen mounting.

NOTE: The vehicle mount is an optional accessory. Go to garmin.com to purchase optional accessories.
  1. Plug the automotive power cable Call-out number one into the port Call-out number two on the device.

    Exploded view of the automobile mount installation with a callout
  2. Remove the clear plastic from the suction cup Call-out number three.
  3. Clean and dry your windscreen and the suction cup with a lint-free cloth.
  4. Press the suction cup to the windscreen, and flip the lever Call-out number four back toward the windscreen.
  5. Snap the cradle Call-out number five onto the suction-cup arm.
  6. Fit the top of your device into the cradle.
  7. Press the device into the cradle until it snaps into place.
  8. Plug the other end of the automotive power cable into a power outlet.
GUID-7E13E879-D2C7-4B0C-9E63-CD693B2E7042 v4
October 2024
© 2023 Garmin Ltd.