Mounting Considerations
When selecting a mounting location for the GOS™ 10 hub, observe these considerations.
This device should be mounted in a well-ventilated location that is not exposed to extreme temperatures or conditions. The temperature range for this device is listed in the product specifications. Extended exposure to temperatures exceeding the specified temperature range, in storage or operating conditions, may cause device failure. Extreme-temperature-induced damage and related consequences are not covered by the warranty.
-
You should mount the hub in a location that is not surrounded by metal or enclosed in an area that would block wireless communication with an MOB tag.
NOTE: If it is not possible to install the hub in a location that allows for clear wireless communication, you can install and route the included antenna in a different location to improve the signal strength (External Antenna Considerations). -
You should mount the hub in a location that is easily accessible, so you can physically disable it to regain power to the engines in the rare case of a Garmin OnBoard™ engine cutoff system malfunction.
-
You should mount the hub near the helm, so you can secure the alarm buzzer in the wiring harness in a location where you can easily hear it while piloting the vessel.
-
You must mount the hub in a location that is not submerged or prone to heavy water exposure.
-
To avoid potential water ingress, you should mount the device in a vertical orientation if possible, against a bulkhead, with all connected cables pointing downward.